Six ways to use medical air disinfection machine
The dynamic control of the disinfection machine adopts the light touch panel control and the infrared remote control mode to select the sterilization factor (the sterilization factor refers to ultraviolet light, ozone, photocatalyst, negative ion) air volume selection, swing leaf selection and timing selection, and automatically run according to the selection mode. The static control adopts manual start-up and timed automatic shutdown work mode, and can be statically disinfected at any time for 24 hours.
　　
Medical air disinfection method
　　
1. The department keeps the instruction manual of the disinfection machine and operates according to the requirements.
　　
2, pay attention to the airtightness of the room. Doors and windows should be closed during disinfection to keep the room well sealed. It is strictly forbidden for people to enter, and the number of indoor personnel should be reduced as much as possible to ensure the disinfection effect.
　　
3. Pay attention to the surface hygiene of indoor objects. This machine is only effective for air and has no disinfection effect on the surface of the object. If there is more dust on the surface of the indoor object, the disinfection machine will generate secondary dust when working, causing continuous contamination of the airborne microorganisms, and the sterilization will fail in the specified time.
　　
4, the choice of disinfection boot time.
　　
1) Preventive disinfection: disinfect 2-3 times a day, 60-120 minutes each time. It is usually arranged before work in the morning and after work in the afternoon or at night. The general disinfection time is 5 hours.
　　
2) Dynamic disinfection: The purpose is to control and reduce secondary pollution of ambient air during personnel activities. It is usually carried out during peak periods of personnel activities.
　　
3) Static disinfection can be performed once a week for 2 hours.
　　
5. The corresponding record should be made at the end of each disinfection, and the accumulated time should not exceed 4000 hours.
　　
6. The disinfection machine adopts the principle of ultraviolet circulation wind physical filtration and disinfection. Therefore , the space around the disinfection machine should avoid object blocking as much as possible to keep the air flowing smoothly, and should protect the air from circulation as much as possible.
Shanghai Sujing Industrial Co., Ltd.
　　
If you have any needs, you can always pass with me, thank you very much for your support to Sujing, look forward to working with you.
　　
have a pleasant workday!
　　
Thankyou&Bestregard!
　　
SUJING—JINGHUA
VTM sampling kits are designed for the collection, preservation, and transport of viruses, chlamydia, mycoplasma, and ureaplasma urea. They are now widely used for sampling and transporting prior to virus detection. MandeLab's VTM kits provide a safe and convenient way to collect and transport virus samples.
Nasal swab kit virus sampling tube,Used to collect samples of secretions from the throat or nasal cavity, Disposable
Jiangsu iiLO Biotechnology Co., Ltd. , https://www.iilogene.com