How to use the beat type aseptic homogenizer

How should the beat-type aseptic homogenizer be used? And what should I pay attention to when using it? The following will explain in detail:

First, the use of tapping aseptic homogenizer

1. The power plug must be tightly inserted. Looseness may affect the computer controller to cause a crash. If there is a crash, please turn off the rear power switch and restart after 3 minutes of shutdown .

2. Please do not open the homogenizer door when working on the hammer plate to avoid overflow of the sample liquid. It should be built according to “on / off” and the equipment will stop running automatically. When the door is closed, press “Open / Stop” to build, and the device will automatically complete the remaining work.

3. If the homogenizer is not used for a long time, the power should be cut off and the plug should be removed.

4 , the bottom of the homogenizer door is to prevent accidental rupture of the homogenized bag, easy to clean the spill, the bottom design is empty, you can place the water tray, so do not extend the hand from the bottom when the instrument is running, so as not to scratch the finger.

5. Before the machine is running, please check whether there is any foreign matter in the homogenization box to avoid malfunction and damage to the homogenized bag during work.

6 , lumps, bone, ice-like substances should not be used, so as not to damage the homogenized bag.

7. The homogenizer and the homogenized bag should be stored away from direct sunlight. In particular, the homogenized bag should be stored in a place free of sunlight or ultraviolet rays to avoid aging.

8. When the amount is small, when the speed needs to be increased, when the homogenous fiber is tough, the rear knob can be used to adjust the spacing between the slap plate and the window to achieve better homogenization.

Second, the use of tapping aseptic homogenizer

1. The power plug must be tightly inserted. Looseness may affect the computer controller to cause a crash. If there is a crash, please turn off the rear power switch and restart after 3 minutes of shutdown .

2. Please do not open the homogenizer door when working on the hammer plate to avoid overflow of the sample liquid. The equipment should be automatically stopped according to the "on / off" construction. When the door is closed, press “On / Off” to build the device to automatically complete the remaining work. Do not reverse the operation.

3. If the homogenizer is not used for a long time, the power should be cut off and the plug should be removed. Prevent the aging of electronic components inside the aseptic homogenizer.

The bottom of the homogenizer door prevents accidental rupture of the homogenized bag, which is convenient for cleaning the spill. The bottom design is empty, and the water tray can be placed. Therefore, do not extend the hand from the bottom when the instrument is running, so as to avoid scratching the fingers. When the homogenizer is working, it is best not to open the homogenizer door, causing unnecessary losses.

4. Before the machine is running, please check the homogenization box for foreign matter to avoid malfunction and damage to the homogenized bag during work.

Hard and sharp materials such as lumps, bones, and ice should not be used to avoid damage to the homogeneous bag.

5 , the instrument and the storage of homogenized bags should avoid direct sunlight, especially the homogenized bags should be stored in the place without sunlight or ultraviolet radiation to avoid aging.

6. When the amount is small, when the speed is higher, when the homogenized fiber is tougher, the rear knob can be used to adjust the spacing between the beater and the window to achieve better homogenization. Pay attention to the adjusted distance to avoid the occurrence of damage to the sterile homogenizer caused by air strikes.

For more information on homogenizers, please visit: