Seven-roller horizontal hair removal machine instructions
2024-10-29 03:01:36
The seven-roller horizontal hair removal machine is a kind of machine for automatic hair removal after slaughtering of chickens, ducks and geese. It is a microcosm of a large slaughtering production line. It consists of seven rollers, a horizontal hair removal machine and a high-quality glue stick.
In the process of roughing, it will not cause the advantages of broken feet, broken teeth, bad heads, rotten mouths, rotten skin, high hair removal rate, etc., which makes people get rid of the tired and cumbersome plucking work, suitable for poultry slaughterhouses and poultry slaughtering workshops. , restaurants, canteens and other units. The reasonable price of this product is a good choice for your work.
How to use the seven-roller horizontal hair removal machine :
1 Check if the ground wire and power cable are connected before use, confirm that the water supply of the switch faucet is normal, then put on the power switch to check if the roller rotation of the machine is normal.
2 Boil the poultry to be depilated in 65-68 degrees water, put it on the flat plate of the hair removal machine (note that the poultry should be placed horizontally on the flat plate), swing the plate, and send it into the machine for hair removal.
3 After about ten seconds, turn on the faucet and the machine will continue to rotate for 10-30 seconds (depending on the actual hair removal effect), turn off the faucet, step on the pedals, and the depilated poultry will be sent out of the machine with inertia.
4 Seven-roller horizontal hair removal machine In the process of the last batch of poultry fur, the next batch of poultry that has been depilated and hot water can be put on the flat plate. After the last batch of hair removal clean delivery machine, the next batch will be placed immediately. In the machine, the special cycle is operated again.
5 When the hair removal is not very clean, check the reason, if the hot water is not hot, (water temperature and time control), you can also extend the hair removal time properly until the effect is good.
6 Wash the hair removal machine with clean water after the hair removal is completed (be careful not to flush the motor and the power supply box with water).
FOSHAN PHARMA CO., LTD. , https://www.fs-pharma.com