Medical tape holding method for detecting stickiness
The detection method of the adhesiveness of medical tape is an important test index in medical tape, and the adhesive tester is an essential test instrument for pharmaceutical factories.
Medical tape holding viscosity detection method:
Wipe the test and loading plates with a wiping material and then clean them carefully with clean gauze.
Above, until the working surface of the board is visually inspected and cleaned. After cleaning, do not touch the working surface of the board with your hands or other objects.
At a temperature of 23 ° C ± 2 ° C, relative humidity of 65% ± 5%, according to the specified size, the sample is parallel to the longitudinal direction of the plate
Place it in the middle of the test board and loading board next to each other. The sample was rolled at a speed of about 300 mm/min with a press roll. Note that when rolling, it can only be applied to the specimen with the force generated from the quality of the press roll. The number of rolling can be specified according to the specific product conditions. If there is no regulation, the rolling is repeated three times. Then, the test plate is vertically fixed on the test stand, and the load plate and the weight are lightly connected by pins. The entire test rack is placed in a test chamber that has been adjusted to the required test environment. Record the test start time.
Label: Sticky Tester  Adhesive tape tester, self-adhesive , adhesive tester, pressure sensitive adhesive tape, adhesive tester, medical label, adhesive tester
Stirrer Mixer And Shaker,Magnetic Stirrer,Laboratory Hot Plate,Stirrer With Hot Plate
Guangdong Widinlsa International Co.Ltd , https://www.guangdongwidinlsa.com