Basic knowledge of dry heat sterilization oven

The dry heat sterilization oven is installed on the low clean side to verify the test hole DN40, which can be used for temperature distribution and cleanliness testing. The outer casing is made of imported 3042B stainless steel plate matt, the inner chamber is made of 316L stainless steel plate, the thickness of the plate is 2-3mm, the outer surface of the box is polished, the inner wall surface roughness Ra≤0.6μm, and the filter end is protected by stainless steel orifice plate. The high quality insulation material in accordance with GMP requirements keeps the inner wall warm.
The heating mode of the dry heat sterilization oven is hot dry heat sterilization. The double door is electronically interlocked and cannot be opened at the same time. At the same time, the clean side door can be opened after running the setting disinfection program to ensure that the door cannot be closed under the set conditions. Open, with a reliable seal to prevent leakage. And it can display the air pressure difference in the sterilizer relative to the outside, the range is >30pa, so as to ensure the cleanliness of the sterilizer meets the requirements of Class 100.
In addition, all interfaces use a hygienic flange interface, and there are at least seven temperature probes in the cabinet for controlling temperature and printing temperature.

FD Strawberry

Fd Strawberry,Fd Strawberry Cube,Fd Strawberry Flakes,Freeze Dried Strawberry

Xinghua Dongbao International Trade Co.,Ltd , https://www.xhdongbaofoods.com