Inkjet recycling method for inkjet printer
When the printer is used daily, if there is no cleaning or maintenance for a long time, a certain amount of ink will be accumulated in the lower recovery tank of the nozzle. If the time is long, the quality of the code will be affected, and even the blocked ink of the recovery tank cannot be renewed. Returning to the ink circuit, the words that are ejected will become problematic or missing, so you should pay attention to the smoothness of the recovery tank and the cleaning nearby when cleaning and maintenance.
Generally, we check the causes of ink accumulation in the following aspects. The first one is whether the position of the ink line and the recycler are aligned. If the nozzle is hit by an external force, this problem will occur; the second is to check the viscosity. If the viscosity is too high or too low, there may be problems in the deflection of the ink dot, which may cause problems in the deflection of the ink line. The third is to check whether the breakpoint has been changed. If the breakpoint is set, the ink line will be affected. route.
We can also solve the problem of ink accumulation near the recycling tank by checking the printer settings. There may be a problem with the height of the setting. Therefore, the setting of the word height in daily use will also affect the ink accumulation in the recycling tank. It is best to use the limit word height in the printer setting when it is not needed, because the mediation is too large or the displacement of the ink line is likely to cause a certain amount of ink accumulation in the vicinity of the recovery tank.
Zeolite Absorbent,Synthetic Zeolite,Natural Zeolite
Polyurethane Catalyst,Rubber Auxiliary Co., Ltd. , http://www.wflonggang.com