The standard, technical parameters and structure of the salt spray box are introduced in detail.
First, [forest frequency] salt spray box meets the standard:
GB/T2423.17-2008 Basic environmental test procedures for electric and electronic products - Test method for KA salt spray
GB/T 2423.18-2000 "Basic procedures for electric and electronic products test" Kb: salt spray, alternating (sodium chloride solution)
GB-T10125-1997 Artificial atmosphere salt spray corrosion test
GB/T10587-2006 salt spray test chamber technical conditions
GB10593.2-1990 Methods for measuring environmental parameters of electric and electronic products
GB-T1765-1979 Method for preparing paint film for moisture and heat resistance, salt spray resistance and weather resistance (manual acceleration)
GB T1771-2007 Determination of resistance to neutral salt spray of paints and varnishes
GB/T12967.3-2008 Copper accelerated acetate spray test (CASS test)
GB/T 5170.8-2008 Electrical and electronic products environmental testing equipment inspection methods Salt spray test equipment and equivalent IEC, MIL, DIN, ASTM and other related standards or industry standards.
Second, [forest frequency] salt spray box specifications model (unit: mm):
Model LP/YWX-150 Inner Dimensions D×W×H 450×600×400 Dimensions 700×1200×1100 Power: 1.3KW
Model LP/YWX-250 Inner Dimensions D×W×H 600×900×500 Dimensions 950×1500×1200 Power: 1.5KW
Model LP/YWX-750 Inner Dimensions D×W×H 750×1100×500 Dimensions 1100×1700×1250 Power: 4.0KW
Model LP/YWX-010 Inner dimension D×W×H 850×1300×600 Dimensions 1150×2100×1550 Power: 5.0KW
Model LP/YWX-020 Inner Dimensions D×W×H 900×2000×600 Dimensions 1250×2800×1600 Power: 6.5KW
Third, product technical indicators:
1, temperature range: RT + 5 ° C ~ 55 ° C
2. Humidity range: 85~98% R?H
3. Temperature fluctuation: ±0.5°C
4, temperature uniformity: ± 2 ° C
5, salt spray settlement: 1 ~ 2ml / 80cm2.h
6, air saturator: RT + 10 ° C ~ 70 ° C
7. Compressed air pressure (kg/cm2): 2.00±0.01
8, spray method: continuous / cycle optional
9, test time: 1 ~ 9999 H, M, S (adjustable)
10, cycle time: 1 ~ 99 H, M, S (adjustable)
11. Sample holder: The sample holder can meet the tilt test of 15 ° C ~ 30 ° C
Fourth, the control system:
With the intelligent YWX100 integrated control temperature controller, it has a comprehensive protection system, which makes you safer and more secure during use:
1. No fuse protection switch;
2. Over temperature protection of the box and saturator;
3. Low water level protection of the box and saturator;
4. End of test instructions;
5, rapid fog indication;
6. Compressed gas two-stage voltage regulation and voltage protection;
7, overload, leakage has automatic shutdown and other protection.
Fifth, the box structure → ↠spray system:
1. The salt spray test box is made of imported PVC reinforced hard plastic board. The surface is smooth and flat, and it is resistant to aging and corrosion. It is easy to clean and has no leakage. Abandoning the FRP material should produce surface fading and fibrillation. The forest frequency can also be based on Customers request custom PP board material.
2, super large salt water tank design, to stop the test due to lack of salt water;
3, heating is the inner tank type heating and humidifying method, the heating is fast, the temperature and humidity are evenly distributed;
4. The spray gas is subjected to two-stage voltage regulation and pressure regulation, and oil pollution filtration and gas humidification preheating are performed at the same time;
5. The atomized brine storage is built-in concealed and has a large storage capacity, and the brine is equipped with a preheating function;
6. The quartz brine filter element is equipped before the salt water is atomized to avoid the nozzle impurity blockage test.
7. All pipes in the test box are made of thickened fluorosilicone rubber tube, which can remain unaged and cracked for 15 years;
8. The salt water tank has high and low water level indications;
9, customer-supplied air compressor, purchase requirements: Exhaust pressure: ≥ 8 kg Volume flow: ≥ 0.12m3 / min.
......→
The salt spray box is mainly used for parts, electronic hardware components, protective layers of metal materials and salt spray corrosion test of industrial products!
Sincerely recommend the Shanghai well-known trademark - [Lin frequency] brand! Search: Salt spray test box, salt spray corrosion test box, salt spray test box, salt spray tester, salt spray test machine, salt spray test machine and other series of aliases can find our company related product information.
1. Delivery period: Shipped within 3 working days after receiving the advance payment;
2, payment method: 50% prepaid, the goods will be settled after the acceptance of the goods;
3, delivery method: free delivery by car or consignment;
4. Installation and commissioning: The supplier is responsible for free installation and commissioning, and training 2-5 operators to learn to operate independently;
5, after-sales service: warranty for one year, lifetime maintenance, once every six months from time to time maintenance.
dental handpiece high speed,handpiece high speed,high speed handpiece,dental high speed handpiece,high speed dental handpiece
Foshan Ja Suo Medical Device Co., LTD , https://www.jasuodental.com