How to properly debug and maintain the barrel filling machine
The whole process of barrel production line is integrated with flushing, filling and capping functions. It is an ideal equipment for the production of mineral water, distilled water and pure water. It is made of high quality stainless steel, corrosion resistant and easy to clean. The machine is compact in structure, high in work efficiency, stable and reliable, sensitive in action and high in automation. It is a fully automatic barreling machine with three-in-one machine.
First, the automatic barrel filling machine filling accuracy adjustment:
1. The filling error is mainly determined by the filling amount, the filling speed, and the switching speed of the upper and lower valves. The switching speed of the upper and lower valves is related to the viscosity of the product. The higher the viscosity, the slower the valve switching speed.
2. Adjust the spring pressure of the valve to determine the volume of the test and the experience of the operator.
3. The switching speed of the thickened valve mainly adjusts the spring pressure of the valve. As the spring pressure increases, the valve's switching speed increases.
Second, the automatic use of automatic vat filling machine notes:
1. The barrel filling machine is set without power supply, and the normal air source is 4-6kg.
2. Do not wash the fuselage directly with water when removing and washing the vat filling machine.
3. If there is overflow phenomenon in the injection nozzle, press the safety emergency stop switch to ensure the workshop is neat.
4. The barrel filling machine has a simple circuit and must not be inserted or removed at will.
5. When the cylinder is not returned due to improper operation, please press this button to reset it.
Third, automatic vat filling machine equipment maintenance:
1. Automatic vat filling machine The barrel filling machine body is made of stainless steel. Do not scratch the surface with sharp and hard sharp objects.
2. When removing and removing the piston, remove the fixing screws at the same time to avoid affecting the other process requirements when the first one is removed.
3. Before cleaning the piston drum filling machine, the remaining product should be cleaned and then filled with soft cleaning liquid. The company recommends using warm water. Use soapy water, alcohol or other cleaning solution if needed.
4. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil.
Urology products are urology consumables & urology devices used in the urology department of the hospitals. They are including the all types of Ureteral Stent, Foley Catheter ( silicone & latex), Urine Bag etc.
Urology products,Urology consumables,Ureteral catheters,Urology devices
2 MEDS TECHONOLOGY CO.,LTD , https://www.2-meds.com