101-0A electric blast drying oven is well-crafted

101-0A electric blast drying oven is well-crafted

Shanghai Hao Titan has mechanical production equipment and technical personnel, strong strength, technical quality and reliable quality. Manufacturers, large quantity and excellent supply, long-term supply price is affordable, (drying box / muffle furnace series / cement equipment / asphalt equipment, etc.) Welcome new and old customers to choose products manufactured by Shanghai Hao Titan Machinery Manufacturing Co., Ltd.

101-0A electric blast drying oven structure overview The drying box consists of three parts: the box, the electric heating blast system and the temperature control system.
The box body is composed of a working chamber and an outer casing, and the casing of the casing is sprayed with a steel plate surface. The studio is made of mirror stainless steel plate and galvanized plate according to user's requirements; the height of the shelf made of stainless steel wire is adjustable, and there are 2 pieces attached to the factory (can be increased according to user needs). There is a large double-layer tempered glass inspection window on the door of the box, which can clearly observe the heated and dry items in the box. The joint between the studio and the door is equipped with a heat-resistant silicone rubber seal to ensure the seal of the studio. The power switch, temperature display, temperature controller, fan switch, etc. are all installed on the left side for easy operation.
The electric heating blast system is composed of a fan, a duct, and an electric heating element; an electric heating tube (or an electric heating wire), a fan, and the like are installed at the bottom of the working chamber.
The temperature control system consists of a temperature controller, a power tube (or heating wire), and a temperature sensor.

101-0A electric blast drying oven use and precautions
1. After connecting the power supply, you can turn on the 2 sets of heating switches, and then set the temperature of the control instrument to the temperature you need. The indicator light is on and the blower switch can be turned on to make the blower work.
2. When the temperature rises to the desired temperature, the indicator light is off. At the beginning of the constant temperature, the temperature may continue to rise. This is the effect of residual heat, which will tend to stabilize in about half an hour. In the constant temperature process, the temperature control is automatically controlled by the thermostat in the box without manual management.
3. When the temperature is constant, a set of heating switches can be turned off, leaving only one set of electric heaters to work, so as to avoid excessive power and affect the sensitivity of the constant temperature.
4. The box should be placed indoors.
5. A blade switch of the iron casing shall be installed in the power supply line for the purpose of this box and the casing shall be grounded.
6. Please check the electrical performance of the box before power-on, and pay attention to whether there is an open circuit or leakage.
7. When everything is ready, put the test sample, close the door and unscrew the top exhaust valve. At this point, you can connect the power supply and start working.
8. Do not arbitrarily remove the side door, disturb or change the line. Only when the box fails, the side door can be removed and checked one by one. If there is a major fault, you can contact the factory.
9. This box is a non-explosion-proof drying box, so it has flammable volatiles. Do not put it in a dry box to avoid explosion.
10. Two drying shelves are attached to each drying box. The average load per shelf is 15 kg. Do not over-tighten and overload the test specimens to avoid affecting hot air convection. At the same time, the test piece should not be placed on the heat sink on the bottom of the studio to prevent overheating and damage the sample.

101-0A electric blast drying oven
101-0A electric blast drying oven is manufactured by Shanghai Hao Titan Machinery Manufacturing Co., Ltd., and can be customized and customized for various types of electric blast drying ovens for factories, mines, universities, scientific research and various laboratories. Wait for the items to be dried, baked, melted, and sterilized.

Main technical parameters of 101-0A electric blast drying oven

101-0A electric blast drying oven before use
1. The box is placed indoors in a dry and horizontal position without the use of other fixtures.
2. An air switch that matches the current of the equipment should be installed in the power supply line for the purpose of this box, and the conductor is twice as thick as the power line.
3. Before powering on, check the electrical performance of the electrical box first, and pay attention to whether there is an open circuit or leakage.
4. When everything is ready, put the test sample, close the door, and unscrew the exhaust valve at the same time. The gap is about 10m/m. At this point, you can connect the power supply and start working.
5. Do not arbitrarily remove the side door, disturb or change the line. Only when the box fails, remove the side door and check the line one by one. If there is a major fault, it can be connected with the factory.
6, the model of the different types of drying oven temperature controller is different, confirm the temperature controller model before use. Intelligent PID temperature control temperature control instrument, instructions for use refer to the dedicated instruction manual. The ordinary digital display temperature controller, the preset value of the temperature, is investigated by the setting circuit setter (knob).
7. The display shows whether the current temperature measurement value or the set value is measured. It is determined by the setting selection switch state. When the button is pressed, the set value is displayed. The preset knob is clockwise, adjusted to the preset value, and then pressed to restore. The measured value is displayed.
8. When the temperature rises to the required working temperature (from the red digital display), the indicator light alternately turns off and is the constant temperature point. (It is very likely that the reading will continue to rise at constant time, and this and the residual heat will be stable after about half an hour)
9. When the temperature is constant, the high temperature switch can be turned off, leaving only one set of electric heaters to work. Reduce power usage while extending relay life.

Manual Massage Foot Spa Massager

A manual massage Foot Spa Massager is a device designed to provide a relaxing and therapeutic foot massage. It is a manually operated handheld device, which means it does not require electricity or batteries to operate. The massager is made up of several parts, including the handle, rollers, and knobs.

To use the manual massage foot spa massager, you simply place your foot on a flat surface and apply the massager to the soles of your feet. The rollers and nodules stimulate the nerves and muscles in the foot, providing a deep tissue massage that helps relieve tension and pain.

The massager is small and lightweight, so you can easily take it with you wherever you go. It's also easy to clean, just wipe with a damp cloth after each use.

Overall, the Manual Massage Foot Spa Massager is a great option for those who are looking for an easy and effective way to relax and soothe their feet. It's affordable, easy to use, and can provide a range of health benefits, including improving circulation, reducing stress, and relieving foot pain and discomfort.

Manual Massage Foot Spa Massager,Portable Pedicure Tub,Bath Foot Massager,Foot Bath Machine

Huaian Mimir Electric Appliance Co., LTD , https://www.nbmimirfootspa.com