How to properly replace the tablet die

Nowadays, due to its powerful functions, the tablet press has been recognized by many professionals in the pharmaceutical industry.

Of course, the tablet press can achieve such great results, which is inseparable from the efforts of our practitioners, so we should not forget the staff who are silently behind the scenes.

Tablet press die if you replace the punch can suppress a variety of tablets, which is a very scientific approach.

We all know that each person's physique is different, which increases the difficulty of medication. Since the tablet press has been used, it has been solved easily.

The tablet press can change the thickness and size of the tablet by changing the die, which is also a greater guarantee for the medication.

So for the average person, there is very little contact with the tablet press die, so it is very difficult to remove and replace the die.

In response to this problem, we are here to explain in detail how to correctly replace the die.

1. Loosen the lower punching fixing screw, turn the handwheel to raise the lower punching rod to the high position, and insert the lower punching rod into the hole of the lower punching rod (note that the notched slope of the lower punch is aligned with the lower punching fastening screw, And to insert the bottom) tighten the undercut fixing screw.

2. Install the lower punch, loosen the upper punching nut, insert the upper punching rod into the hole of the upper punching rod, insert it into the bottom, and use a wrench to clamp the hexagonal tightening upper punching of the lower part of the upper punching rod. Nut.

3. Install the middle mold, loosen the middle mold fixing screw, put the middle mold flat into the hole of the middle mold plate, and make the lower punch into the hole of the middle mold and press the middle mold fixing screw. When placing the mold, pay attention to flatten the middle mold to avoid jamming when it is placed and damage the hole wall.

4. Turn the handwheel by hand to slowly lower the upper punch into the middle die hole to observe whether there is collision or friction. If there is a collision or friction, loosen the middle mold plate fixing screws (two), adjust the position of the middle die plate to fix the upper punch into the middle die hole, and then tighten the middle die plate fixing screw, so adjust It means that there is no collision or friction until the upper punch enters the middle mold.

As long as you follow the method written above, step by step, I believe that it is very easy to change the die for the tablet press die. If you don't understand, you can search our video camera to debug the video to follow. The standard of medication required for different illnesses.

Cosmetic Ingredients

Cosmetics are chemical mixtures made of natural, synthetic or extracted substances with different functions as raw materials and processed through production procedures such as heating, stirring and emulsification. AMULYN mainly provides cosmetic ingredients extracted from pure natural plants, which mainly play the roles of whitening, anti-aging, moisturizing, anti-oxidation, anti-inflammatory and acne-removing, and hair care. Recommended products include astaxanthin powder, bakuchiol, hydrolyzed keratin powder, Aloe Vera Extract, etc.

Astaxanthin Powder,Bakuchiol,Hydrolyzed keratin Powder,Salicin,Aloe Vera Powder

Xi'an Gawen Biotechnology Co., Ltd , https://www.amulyn-bio.com