Problems and solutions for boiler water treatment equipment
Problems and solutions for boiler water treatment equipment
Boiler water treatment problems
1 No boiler water treatment implemented
At present, some boilers are often not taken seriously because they are relatively small in capacity or used only in winter, and those who manage small boilers often have insufficient experience in boiler water treatment. In the boiler management process, there is no effective implementation of small boilers. The boiler water treatment causes scaling or corrosion of the boiler, which has a serious impact on the management of the boiler over time.
2 Boiler water treatment method is improper
At present, many enterprises have often adopted unscientific methods for the treatment of boiler water in order to save more expenses, and various tools and instruments used in the process of boiler water treatment do not comply with relevant regulations. For example, "three no" electronic anti-scaling equipment and anti-scaling agents.
In terms of personal interests, this approach can not only reduce the cost of chemicals but also eliminate the expense of water analysts, but it can not fundamentally solve the problem of boiler scaling and corrosion, and not only cause energy waste. It also reduces the life of the boiler.
Moreover, if the anti-scaling agent is used improperly, it will have the opposite effect on the protection of the boiler, accelerate the scaling and corrosion of the boiler, and bring serious threat to the normal operation of the boiler.
3 does not pay attention to boiler water pH
Generally speaking, for the steam type boiler, the water hardness index is very important. The hardness of the boiler water often affects the scaling and corrosion problems in the later stage.
If the hardness of the boiler water is high, the boiler water will be fouled by evaporation, and the hot water boiler is relatively more susceptible to corrosion.
4 boiler water treatment equipment problems
If the water quality of the water treatment equipment used in the boiler water treatment is not good, and the water discharge efficiency is not high, the boiler scale and corrosion will be accelerated. The main reason is that the resin is improperly used to cause damage to the final oxidation; or the inner wall of the iron boiler is not treated promptly and properly, causing iron poisoning of the resin; or the river water is not filtered before being used as boiler water. The resin is blocked by the sludge and cannot perform a normal function.
5 Water quality test management failed
The relevant units did not have strict rules and regulations for the boilers used, and some of the conventional indicators, such as boiler feed water and boiler steam, were not clearly defined; at the same time, some water quality inspection personnel have low quality and low responsibility, and data for water quality tests No attention is paid, and even worse, the relevant data will be falsified to cope with the inspection by the superior department.
6 improper handling of boiler blowdown
At present, boilers often have two problems in the process of sewage treatment: on the one hand, the boiler workers do not discharge the boilers in order to reduce the heat loss in the sewage discharge process; on the other hand, the boiler sewagers pay too much attention to the quality of the boilers. Excessive sewage discharge causes serious heat loss.
The purpose of the sterilization box is to store the equipment in the process of packaging, sterilization, transfer, storage and so on. These orthopeadic instruments working mode is suitable for high pressure steam sterilization, not suitable for dry heat sterilization, ethylene oxide sterilization, ultraviolet sterilization, microwave sterilization and formaldehyde sterilization. The sterilization instrument box is divided into two parts,the cover and the body. The central area of the box cover is the filter system of the disinfection box, which is composed of quick filter system clasps and filter paper. The clasps need to be fixed by double keys, and the fixed sound can be heard during operation, which can effectively avoid the accidental loss of filter paper. Filter paper can be reused for 1 000 times, has chemical resistance, its chemical properties will not change with time, and its hardness exceeds steel. There is also a safety fit for the filtration system around the box cover, namely a silicone washer and a tension retaining ring. On both sides of the box there are handles, locks and sockets for indicating signs.
Sterilization Container,Sterile Containers,Medical Sterile Container,Sterile Basket
Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com