Livestock husbandry guides the breeding techniques of spring stupid chicks
I. Preparation before entering the chicks. Correct, clean and disinfect the brooding house, prepare feed and common drugs, enter the chicks two or three days before, raise the temperature of the house so that the temperature in the house reaches 32°C-35°C, and the relative humidity in the house is 60%. ~ 65%.
Second, the formal channels into the chicken seedlings. In order to reduce the introduction of pathogenic bacteria into the chicken and make the variety pure, we must purchase chickens from the regular manufacturers, where conditions can be reserved for breeding chickens, self-breeding and self-breeding.
Third, do a good job feeding brooding. After raising chickens into the pens, they should first drink water. The best drinking water is to use cold boiled water, add 5% glucose and 0.05% norfloxacin, and drink for 7 days. After drinking water for 2-3 hours before starting to eat, the chicks need to do less feeding, control the temperature, and gradually increase the temperature within the house as the age increases. Before and after 30 days of brooding, drugs for the prevention of coccidiosis were added to the feed. Because stupid chicken is free-range, it is better to feed yourself. After the chicks were bred and bred, the diet formula was dominated by corn, bran, pancakes, and various green feeds.
Fourth, pay attention to the control of the disease. Prevention is the mainstay, and some viral diseases such as chicken gizzards and bird flu must be well vaccinated. It is often observed that chickens eat and drink, and check the color and shape of chicken droppings. Frequent cleaning and disinfection of sinks, troughs, etc., and disinfection of poultry houses with chicken sprays. Antibiotics are regularly added to drinking water or feed for general disease prevention, but pay attention to the amount of medication. When a disease occurs, diagnose it as soon as possible and promptly treat it.
High purity Polyaluminum chloride PAC 30% supplier
1.PRODUCT APPEARANCE: APPEARANCE: The solid product is produced by the spray drying technology and the obtained product is light yellow, Corresponding liquid products is light yellow.
2.RAW MATERIALS:Domestic high-quality aluminium hydroxide,High-quality calcium aluminate,High-quality hydrochloric acid
3.USAGE: Drinking water treatment Treatment of high-purity water
4.Product Advantages:
1). Flocculation ability, high adsorption activity, floc formation and deposition of fast
2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation
3).easily to use and good effective
5.Storage: The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .
6.Application method:
1)The liquid product can be used directly or used after dilution.
Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.
2)he specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton
Water Treatment Chemicals,Waste Water Treatment Chemical,Water Treatment Chemical
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com