How to maintain and keep the combine harvester

The safekeeping of the combine harvester will directly affect the production efficiency and the service life of the machine in the coming year. After the operation is completed, the maintenance work shall be done in time. 1. Thoroughly clean the inside and outside of the machine, such as dirt, broken rods, grains, etc., and dry it in the hangar and park it. 2. Remove all the belts and wipe them clean. Apply talcum powder, fasten the labels, and hang them on the wall inside the hangar. Remove the chain and put it into diesel (or kerosene) to clean it, then put it in oil and soak it in for about half an hour. Then remove it with grease and wrap it in kraft paper and store it in a dry and ventilated place. 3, carefully inspect all parts, found excessive wear parts, deformation, damage, should be replaced in a timely manner; found that the welding, riveting parts off welding, cracks and other phenomena should be promptly repaired. 4. Lubricate all parts strictly according to the lubrication diagram and oil requirements of the machine. If necessary, replace the chassis, gearbox, and hydraulic oil. In the work of the machine, the oiled or buttered parts shall be coated with the frictional parts, and the paint shall be applied to the painted parts. 5, to reduce the header to a minimum, with a square mat. Put the net water in the engine and discharge the oil and the oil in the oil pan. Use a plastic cloth to wrap the air cleaner, exhaust nozzle, fuel tank filler, etc., and inject the appropriate amount of oil into the cylinder and turn the crankshaft several times. Remove the battery and store it separately.