The characteristics and application of the press
The press consists of a frame, a drive train, a feed section, a juice extraction section, a hydraulic (spring) system and a shroud, and an electrical control section.
Rotating the spindle press screw presses together the material conveying screw press fit over the shaft with the coil for reverse rotation, a pressing force of the material of the uniform, slag cones controlled by a hydraulic cylinder (spring), the hydraulic pressure adjustment ( The spring can change the pressure applied to the material and adjust the sweat rate from the surface. The effect will vary from material to material.
The press can also be widely used in alcohol factories, fine chemical feeds and other industries for solid-liquid separation operations of materials containing certain fibers, such as dehydration treatment of materials such as potato and bamboo shoots, such as cassava distiller's grains and asparagus raw materials. Etc., the water content of the material after dehydration by the machine is ≤60% (adjustable).
The function of the press is different from that of the horizontal screw machine, the filter press, the vacuum suction filter and the ordinary screw press, which can make the waste residue or sludge reach the required dewatering rate and the cost is extremely low and the application is convenient.
Datian Micro Spray,Micro Sprinkler,Micro Spray System,Micro Spray Equipment
Shandong Yibiyuan Water-saving Equipment Technology Co., Ltd. , https://www.cnybyjs.com